The Interface X on the PW-X3 motor equipped Yamaha Moro YDX is Bluetooth enabled and can connect to smartphone apps, GPS devices, or bike computers. However, the display itself is horrible, with just a series of LED lights to tell you the assist level and battery level (in only 25% increments). The location isn't great either right next to the stem.
Yamaha also makes the Display A which is a plug-and-play upgrade. While it doesn't have Bluetooth, it shows the speed, assist level, and battery level in 5% increments. It also combines the assist buttons with the display itself, so it's fewer wires and an altogether more compact design.
To replace it, remove the right side cable cover, and gently pull the wire out until you get to the connector. With a bit of finess the connector will come out through the cable port. At that point just disconnect the Interface X, and connect the Display A.
No comments:
Post a Comment