Friday, January 16, 2026

Andreani Thread

Many vacuum bleed adapters use "Andreani thread" named after the Andreani vacuum bleed machine. It's actually an 1/8" BSPP (British Standard Pipe Parallel) thread. 


Adapters from BSPP to NPT are available:

https://www.amazon.com/dp/B0CLHK1CP2

https://www.amazon.com/dp/B01LQU8FV8

NOTE: There is a British Standard Pipe Parallel (BSPP) and also a British Standard Pipe Taper (BSPT). Make sure you purchase the Parallel.

at
Labels: ,

2 comments:

  1. StevosJanuary 26, 2026 at 8:02 PM

    Do you use this bleed machine for MTB shocks or motorcycle ? I am doing fox x2 and float x MTB shocks. Anything special for MTB shocks in your process ? Thanks Steve

    ReplyDelete
    Replies
    1. ZoltanJanuary 26, 2026 at 9:26 PM

      I use it for MTB shocks, though it can be used for motorcycle shocks as well. They bleed using the same process, though each architecture of shock will vary in the details.

      Delete

Subscribe to: Post Comments (Atom)

Rocky Mountain Powerplay crank length

Rocky Mountain Powerplay bikes come with a mix of 170mm and 165mm crank lengths. Given their relatively low bottom bracket, the 170mm cranks...

  • Fox Alps 4R and 5R shock rebuild
    This is how I rebuild Fox Alps 4R and 5R shocks. While it works well for me, use it at your own risk.  UPDATE: Dr. Zocchi is now selling r...
  • 1995 Schwinn catalog
    Background of the 1995 Schwinn catalog as told by former Schwinn employee Matt Karaus :  Internally this was known as the "magalog...